Headlight Wiring Harness Set for Kia Stinger and SOME Telluride models

RIDICULOUSLY FAST SHIPPING! We ship the same day you order. Often within the hour!

This headlight wiring harness set (pair) will allow you to install any LED light that you want to connect to the parking lights and turn signals, without having to splice into the main headlight wiring harness in your vehicle.

Works for the Kia Stinger and 2020-2022 Telluride models that come from the factory with LED headlights.

The harnesses includes an LED turn signal module that'll allow you to use the LED light source as both the parking lights and turn signals simultaneously. When the parking lights are on, the lights will be on. When the turn signals are turned on, the LEDs will blink with the turn signals, and when the turn signals are turned off, the lights will turn off for a second, and then turn back on for the parking light. If you don't want to use the LEDs as turn signals, just unplug the yellow connector in the harness.

The main harness that plugs into the headlights has four wires coming out of it. There is a separate rectangular module which has 3 wires on one side, which plugs into the wires from the harness, and two wires on the other side, which are used to connect to whatever LED source. The four wires coming out of the main harness are red, yellow, black, and blue. The three wires on the turn signal module are red, yellow and black. Each color matches to each color. If the DRL does not work, then you should unplug the red one and plug it into the blue wire from the main harness.

The harnesses will come with 2 pigtails with waterproof connectors. The black is ground and the red is the power wire for the LEDs. The main harness plugs into the headlights and the main headlight wiring harness in the vehicle.

Each set comes with a pair of connector harnesses - enough for one vehicle.