Skip to content

Tail Light Honeycomb Decal Set for 2018-2021 Genesis G70

Sold out

RIDICULOUSLY FAST SHIPPING! We ship the same day you order. Often within the hour!

Made specifically for the 2018-2021 Genesis G70, these high quality vinyl decals have been precisely cut so that the outer edges will fit the tail lights, as can be seen in the photographs. It's not a universal honeycomb decal kit where you need to cut the edges off after applying them. Installation is shown below.

This product is currently out of stock. If you'd like a set, please contact us and we'll get them in again.

Honeycomb Tail Light Decal Installation:

1. Clean the tail lights thoroughly to ensure proper adhesion. Fill a spray bottle with water and add a few drops of dishwashing soap. Spray liberally throughout the tail light.

2. Remove the decal from its backing paper and spray with sticky side with soapy water.

3. Lay the decal carefully onto the tail light and position it.

4. After positioning, use a damp microfiber towel to press the on the surface and remove bubbles. If you rub, the patter may distort or tear - so DAB and PRESS only.

Avoid washing the car for 72 hours after applying the decals. For sharp corners or bends, you may need to use a hair dryer to ensure good fitment without any creases.